• Detecting the frequencies within 50MHz–6.0GHz
• Monitor (1MHz–470MHz)
• Mobile phone monitor(500MHz–2500MHz)
• Telephone monitor (50MHz–460MHz)
• Digital monitor (900MHz–1900MHz)
• Car monitor (500MHz–1900MHz)
• Car tracker (900MHz–1900MHz)
• Pinhole camera (700MHz–5800MHz)
• Encrypted camera (2400MHz–5800MHz)
• *Alert mode 1: 4 indicator lights and "DiDi" voice
• *Alert mode 2: Vibration and indicator lights
• *Alert mode 3: Silent, indicator lights and earphone
• No-voice vibration induction. As long as (130MHz–1900MHz)
• Wiring radiated source induction let it detect secretly in any special (4000MHz–6000MHz) location.

• Frequency: 50 MHz - 6 GHz
• Lower Frequency: 0 ~ 120 MHz
• Higher Frequency: 149 MHz ~ 400 MHz
• GSM: 900 MHz ~ 1900 MHz
• Detectable Image Frequency: 200 MHz ~ 2400 MHz
• Microwave Frequency: 2400 MHz ~ 6 GHz
• Working Voltage: 3V (AAA x 2)
• Working Current: Caution 8mA
• Vibration: 70mA
• Sensitivity: Max 10 meters Depends on output of Transmitter Detected
• Power Consumption: 2 AAA batteries, Up to 4 hours continuous use
• Color: Bright Silver
• Dimensions: 56 x 90 x 17 mm
• Weight: 50g Gross
• Weight 100g

• 1 x Basic Bug Detector
• 1 x Set of earbuds
• 1 x Instruction Booklet
• FREE Live Technical Support

Using the CDRF Bug Detector

1.Install 2 AAA batteries into the unit and turn it on using the power switch.

2.Enter the room you want to sweep, and turn the sensitivity dial so that none of the yellow or red lights are on; this is so that the detector won’t find wireless signals from your neighbors and such.

3.Begin to walk along the edges of the room, raising the CDRF Bug Detector  from the ceiling to the floor as you move across the room. Move across the whole room this way. The CDRF Bug Detector will detect signals up to 8 feet away.

4.If a signal is being detected, the yellow and red LEDs begin to light up and a beeping sound will occur, or you can set the detector to vibrate mode if you want to keep it silent and covert. When you move to an area where a signal is detected, more lights will begin to turn on and the unit beeps/vibrates much faster.

5.You have located a wireless transmitter!