• Detect hidden cameras and wiretaps
• Audible alarm will change based on proximity of signal
• Detects cell phones at up to 20ft

• Detects wireless cameras up to 10 feet
• Detects cellular phones up to 20 feet
• 50MHz to 6.0 GHz detecting frequency
• 3V DC power (uses two AAA batteries, included)
• 3 warning modes:
• 1-Sound & 3 LED's
• 2-Vibration & 3 LED's
• 3-Silent 3 LED's and earphone output.

• Ear piece
• Pocket clip
• FREE Live Technical Support

Using the CDRF Bug Detector

1.Install 2 AAA batteries into the unit and turn it on using the power switch.

2.Enter the room you want to sweep, and turn the sensitivity dial so that none of the yellow or red lights are on; this is so that the detector won’t find wireless signals from your neighbors and such.

3.Begin to walk along the edges of the room, raising the CDRF Bug Detector  from the ceiling to the floor as you move across the room. Move across the whole room this way. The CDRF Bug Detector will detect signals up to 8 feet away.

4.If a signal is being detected, the yellow and red LEDs begin to light up and a beeping sound will occur, or you can set the detector to vibrate mode if you want to keep it silent and covert. When you move to an area where a signal is detected, more lights will begin to turn on and the unit beeps/vibrates much faster.

5.You have located a wireless transmitter!